
P3m-C
Customizable Horizontal Point Source On-Wall/TV Mount/Free-Standing
Shipping in October 2026
The Insight Series P3m-C is a passive custom-sizable horizontal point source speaker. The P3m-C speaker is available in custom lengths to fit TV’s up to 100″ Diagonal with a minimum width of 16.25” (413cm) and a maximum width of 100″ [2540mm]. The P3m-C contains (1) Spherical PMD for the high frequencies playing down to an amazing 900 Hz, and (2) 4.5″ Woofers to do the low-frequency heavy lifting. The P3m is available in multiple colors and can custom built to match a TV width.
The P3m’s distinctive crescent-shaped woofer apertures act as acoustic lenses, smoothing the front baffle to reduce tweeter diffraction while making the two woofers behave as though they are positioned closer together, improving dispersion and reducing interference through the crossover region. Behind each aperture, Wisdom Audio’s patent-pending Dual-Helmholtz Resonator uses two slightly different tuning points to control unwanted resonances more effectively despite normal manufacturing variations. Together, these technologies help flatten the woofer response, reduce distortion, improve speaker-to-speaker consistency, and deliver more uniform tonal balance across the listening area.
Optional TV VESA-Mount sold separately
Key Features
On-Wall (Included)
TV VESA Mount (Bracket Sold Separately)
Highly Detailed & Dynamic
(1) Planar Magnetic Spherical Drivers
Covers 4 Octaves of Clarity
Light Weight Film PEEK
FAST Acceleration
Single Channel Horizontal Configuration
Available as On-Wall or TV-Mount using a VESA Bracket
Custom Length Available, Minimum width is 16.25” (413mm), Maximum width is 100” (2540mm)
Custom Colors Available.
Full Range Loudspeaker
(2) 4.5″ Woofers
1-CH of Amplification Required
Specification
| Frequency Response | 80Hz – 20kHz +/- 3dB |
| Low Frequency Extension | 60hz (-6dB) 50hz (-10dB) |
| Recommended High Pass Crossover | 80Hz 24dB Linkwitz Riley Crossover |
| Impedance | 4 ohms Minimum 5.2 ohm @ 460Hz, 4.1 ohm @ 20kHz |
| Sensitivity | 85dB 2.83V @ 1m |
| Coverage Angle Horizontal x Vertical (-6db) | 100° x 100° |
| Recommended Minimum Amplifier | 75 Watts |
| Maximum Continuous Power Handling | 200 Watts |
| TV Sizes | Up to nominal 110″ diagonal TV sizes nominal |
| Min – Max Width | Minimum width is 16.25″ [413mm] , Maximum width is 100” [2540mm] Minimum width when used with TV-VESA mount is 40″ [1016mm] Customer must specify width when ordered. |
| Depth with Wall Mount | 3.881” [98.7mm] |
| Height | 5.250″ [133.35mm] |
| Amplifier Channels Needed | 1 |









